Probes Only

Compare to Spectronics Accupro XP2000

Dual UV & White Light Checking

The LumaCheck Dual UV and White Light Meter has been designed to offer the user the most accurate results and versatile calibration options available on the market.

The LumaCheck is a unique system design, since it is the Sensor that stores the calibration details, not the Instrument itself, meaning that only the Sensor needs to be sent for calibration subject to the standards that your facility operate in accordance with. This allows the unit of the LumaCheck to be “hot-swapped” with another sensor and remain in continuous use.

The LumaCheck is housed in an extremely robust and high quality casing and as an exclusive Baugh & Weedon design, it comes with the guarantee of precise and accurate calibration.

Features:

  • Excellent Result Accuracy
  • Dual Sensor
  • Interchangeable Sensor allows the LumaCheck to operate continuously.
  • Lightweight and compact
  • Battery Operated (approximately ten hours of continuous use or several weeks of normal use).
  • Ergonomically designed with Protective Rubber Boot
  • USB charging capabilities
  • Full Color Programmable Display
  • Separate Probe and Separate Cable for convenience and lower replacement costs.

Sensor Head

The LumaCheck not only has a detachable Sensor Head, but also offers a detachable cable too allowing all aspects of the LumaCheck to be interchanged. If the operator has two Sensors with the LumaCheck, this interchangeability means that operators need not be without a functional light meter during calibration.

Technical Specifications

LumaCheck Specifications

Measuring Range: White Light: 5 Lux to 10,000 Lux
UV Light: 0 to 10,000 uW/cm2
*Factory certified up to 5,000 µW/cm2
Resolution: White Light: 0.1 Lux below 10 Lux
UV Light: 0.15 to 10 uW/cm2 (micro watts per square centimeter)
Unit: White Light: Foot Candles (ft-c or fc or lm/ft) or Lux
UV Light: uW/cm2 (micro watts per square centimeter)
Display: 2.8" (70mm), 320 x 240 pixels color display. LCD with selectable backlight.
Screen: 5 readings per second
Conversion Rate: 100ms
Resolution: Up to 0.1 Lux & 0.1 uW/cm2 (configurable)
Dimensions: 6.4" x 3.15" x 1" (163 x 80 x 25 mm)
With Rubber Boot: 6.6" x 3.35" x 1.18" (168 x 85 x 30 mm)
Weight: 0.77 lbs. (350g) including batteries
Power: 2 x 1.5V AA Alkaline Batteries
PC Connectivity: USB or mains charging capabilities
IP Standard: IP54
Resolution: Settable in menu settings
Overall Accuracy: +/- 3% measured against primary standard
Temperature Coefficient: less than +/- 0.01%/C (0° to 50°C)
Irradiance Range: UV-A: 0 - 10,000 uW/cm2, Visible: 0 - 10,000 Lux
Spectral Range: UV-A: 320 - 400nm, Visible: 460 - 680nm

The LumaCheck comes as a complete Kit including:

  • LumaCheck Unit
  • Sensor Head
  • Sensor Cable
  • Blue Rubber Boot
  • 2 x Rechargeable Batteries
  • Carrying Case
  • USB Cable
  • Quick Reference Guide
  • LumaCheck Manual

Product Literature

Description Part # Saved Price Select Option Add to
Yateks Realta 3D Measurement White Light Fiber Video Borescope Series PROBE ONLY, 4mm diameter x Direct View (select length)
Model #
RV-INT-EM10100-00IT - Master
Request Pricing
Yateks Realta 3D Measurement White Light Fiber Video Borescope Series PROBE ONLY, 6mm diameter x Direct View (select length)
Model #
RV-INT-EM10033-00IT - Master
Request Pricing
Yateks Realta 3D Measurement White Light LED Video Borescope Series PROBE ONLY, 6mm diameter x Side View (select length)
Model #
RV-INT-EM10036-90IT - Master
Request Pricing