|
Rebound Hardness Tester dynaROCK II with impact device D, test block, USB charger, direct data transfer to a USB flash device, test certificate, robust aluminum case (Formally 21-100-EN)
|
HT-BAQ-21-100-V2
|
|
Request Pricing
|
|
|
Carrying bag with shoulder strap for dynaROCK II with impact device (Formally 21-113-EN)
|
HT-BAQ-21-113
|
|
Request Pricing
|
|
|
Impact Device D for hardness Tester dynaROCK II - Standard impact device for most hardness testing tasks (Formally 21-120-EN)
|
HT-BAQ-21-120-V2
|
|
Request Pricing
|
|
|
Impact Device DL for Hardness Tester dynaROCK II - Impact device with longer impact body. The diameter of the front pipe is 0.17" (4.2mm) (Formally 21-121-EN)
|
HT-BAQ-21-121-V2
|
|
Request Pricing
|
|
|
Impact device DC for Hardness Tester dynaROCK II - Extremely short impact device for measurements in inaccessible locations or in pipes (Formally 21-122-EN)
|
HT-BAQ-21-122-V2
|
|
Request Pricing
|
|
|
Impact Device D+15 for Hardness Tester dynaROCK II - Includes a recessed reactance coil and a smaller placement surface (0.4" x 0.55" x 0.8")(11 x 14 mm instead of 20 mm) for hardness measuring in slots and deepened areas (Formally 21-123-EN)
|
HT-BAQ-21-123-V2
|
|
Request Pricing
|
|
|
Impact Device C for Hardness Tester dynaROCK II - Lower impact energy for measurements on surface-hardened parts. Impressions are about half as deep as Impact Device D, but higher surface quality (Formally 21-124-EN)
|
HT-BAQ-21-124-V2
|
|
Request Pricing
|
|
|
Impact Device G for Hardness Tester dynaROCK II - Increased impact energy for measurements on heavy castings and forged parts. Measurement in the Brinell range, up to 650 HB. Surface requirements are not as extensive as Type D (Formally 21-125-EN)
|
HT-BAQ-21-125-V2
|
|
Request Pricing
|
|
|
Connection cable for dynaROCK II Impact Device (Formally R-RP-KABEL-EN)
|
HT-BAQ-R-RP-KABEL
|
|
Request Pricing
|
|
|
Set of support rings for convex and concave surfaces, 12 pieces (Formally 21-110-EN)
|
HT-BAQ-21-110
|
|
Request Pricing
|
|
|
Impact Body type G (Formally R-RP-SK-G-EN)
|
HT-BAQ-R-RP-SK-G
|
|
Request Pricing
|
|
|
Impact Body type DL (Formally R-RP-SK-DL-EN)
|
HT-BAQ-R-RP-SK-DL
|
|
Request Pricing
|
|
|
Impact Body type D (Formally R-RP-SK-D-EN)
|
HT-BAQ-R-RP-SK-D
|
|
Request Pricing
|
|
|
Test Block for Leeb Hardness Tester - 3.5"x2.2" (90x55mm) Diameter, 6 lbs. (2.73kg); Engraved hardness scales: HLD, HLDL, HLD+15, HLC; Possible hardness values: 530 +/- 40HLD, 630 +/- 40HLD, 790 +/- 40HLD (Formally HVP-HLD-EN)
|
HT-BAQ-HVP-HLD
|
|
Request Pricing
|
|
|
Test Block for Leeb Hardness Tester with DKD/MPA-Certificate - 3.5"x2.2" (90x55mm) Diameter, 6 lbs. (2.73kg); Engraved hardness scales: HLD, HLDL, HLD+15, HLC; Possible hardness values: 530 +/- 40HLD, 630 +/- 40HLD, 790 +/- 40HLD (Prev HVP-HLD-Z-EN)
|
HT-BAQ-HVP-HLD-Z
|
|
Request Pricing
|
|
|
Test Block for Leeb Hardness Tester - 4.7"x2.8" (120x70mm) Diameter, 13.6 lbs. (6.17kg); Possible hardness values: 500 +/- 40HLG, 590 +/- 40HLG (Formally HVP-HLG-EN)
|
HT-BAQ-HVP-HLG
|
|
Request Pricing
|
|
|
Test Block for Leeb Hardness Tester with DKD/MPA-Certificate - 4.7"x2.8" (120x70mm) Diameter, 13.6 lbs. (6.17kg); Possible hardness values: 500 +/- 40HLG, 590 +/- 40HLG (Formally HVP-HLG-Z-EN)
|
HT-BAQ-HVP-HLG-Z
|
|
Request Pricing
|
|
|
Mobile printer for dynaROCK II
|
HT-BAQ-21-112
|
|
Request Pricing
|
|
|
USB Charger for Hardness Tester dynaROCK II including cable (Formally 21-130-EN)
|
HT-BAQ-21-130
|
|
Request Pricing
|
|
