ICM SiteX X-Ray Machines
ICM was started in 1993 and is a major player in the world wide X-Ray generation market.
ICM equipment has the enviable reputation for both performance and reliability. All ICM systems can run from either conventional line current, generator or batteries and inverter combination.
The modern microprocessor controlled SCU286 Control was designed with the user in mind. At only 14kg. in weight and with an IP65 rating, this small, rugged, portable controller when used with the optional "Time Computing Software", makes the life of the of Radiographer even easier. Enter the film type, material and thickness and the film density required. The SCU286 will then calculate the exposure parameters for you, ensuring the resulting radiographs are right the first time.
ICM X-Ray equipment are the lightest and most portable currently on the market.
An example of this is the new SiteX CP200D. a 200kV constant potential X-Ray, weighing only 12kg. but is powerful enough to penetrate 42mm of steel in 10 minutes. An output from 10kV to 200kV and a maximum of 10mA, means the CP200D is amongst the most versatile X-Ray system currently available on the market. Despite the CP200D being half the weight of a common 200kV portable X-Ray tube, features are not compromised. It also combines a laser pointer, Be and Al filters, a Pb shutter to allow safe warm up and an integrated customizablle diaphragm, all built into a carousel in a tube head. ICM's un-paralleled air cooling system means a 100% duty cycle at 86°F (30°C).