TecScan Eddy Current Systems

Digital Ultrasonic Flaw Detector

Tru Test TruSonic II

The TruSonic II hand held, lightweight Digital Ultrasonic Flaw Detector offers you all the features of larger, heavier instruments such as high resolution, with the usual high gain reserve. In addition to this, this instrument's ease of use is enhanced by the inclusion of extras. For example, in weld testing the exact flaw location is evaluated.

This instrument is lightweight only weighing 2.5 kg (5.5 lbs) including the batteries. Its ergonomic design and operational ease will amaze you. User-friendly programs for display evaluation include 3 or 4 Distance Amplitude Curves (DAC), +6db DAC and AVG evaluation as standard. There is a T-Scan thickness display with optional Encoder B-Scan Scanner and a welding map that displays the defect location for report printing. The large Color TFT display is a bright 400 cd/m2 high contrast screen, which enables you to read your measurement data even under poor lighting conditions. The A-Scan, the instruments settings and the digital measurement readings are all displayed simultaneously.

This instrument can withstand the toughest conditions. All the features are available for demanding thickness measurements. After testing, you can use the many documentation possibilities to record all your calibration parameters and test results. It can store up to 500 records.

An Instrument That Meets Your Needs

  • The high refresh rate (60Hz) of the bright and high contrast TFT screen is reminiscent of successful analog tubes.
  • You can read your measurement readings quickly and clearly. If a measurement is conducted when you are at some distance from your instrument, simply display the reading in large digits.
  • The pulse repetition frequency can be reduced. By doing this, phatom echoes can be avoided, which could occur when testing larger objects.
  • The instrument can store data sets including all instrument parameters, test results and A-Scans and can be recalled at any time.

Features:

  • Joystick controls sets and adjusts all parameters
  • Welding simulation map
  • Large thickness reading display
  • DAC curve with DAC alarm
  • Curve DGS (optional)
  • Positive, negative and minimum depth alarms
  • Filled waveform trace display
  • Separate Gate A and Gate B settings with alarms
  • Peak or Flank measurement
  • Freeze and Peak memory mode
  • Automatic calibration on two points
  • Pulse repetition frequency control
  • Displays sound path value, surface
  • Distance and depth to flaw
  • Angle beam inspections
  • Connects to PC via USB cable to download data and make certificates

    Specifications

    Calibation Range: From 25mm to 6,000mm (≈1" to 236") (steel long)
    Sound Velocity: 2 fixed values (3,230m/s and 5,920m/s) and adjustable in the range of 1,000 to 9,999m/s in steps of 1m/s
    Probe Delay: 0 to 365 µs
    Gain: 100dB, adjustable in steps of 0.1, 2, 6, 12 and 20 dB
    Fine Gain: 0.1 dB
    Frequency Gain: 0.5 - 10 MHz wide band
    Rulse Repetition Frequency: 10 - 1,000Hz, adjustable depending on the set calibration range and the probe delay
    Test Methods: Pulse echo mode and Thru mode
    Pulse Voltage: 300 V negative spike
    Damping: 120 ohm
    Echo Presentation: Full Wave
    Suppression: Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display
    DAC: Recording of up to 8 reference echoes, 40dB dynamic range, display of the DAC curve or 3 or 4 DAC curve (settings)
    DGS: Measurement technique that allows defect echoes through the evaluation of diagrams, DGS associated with particular probes and materials.
    Data Storage: 500 A-Scan Trace Data sets in the Flash memory with additional alphanumeric identification and directory function
    Units of Measure: mm or inch
    Interface: USB
    Probe Connector: Two Lemo 1 connectors or BNC connector
    Power Supply: Removable 13.2Ah / 3.7 V Li-ion Battery or main supply via an external main power / charger unit JBD15-A2S
    Operational Period: Up to 6 hrs with Battery (select LCD low bright)
    Operational Temperature: -5°C - 65°C (23°F - 149°F)
    Storage Temperature: -40°C - 75°C, without batteries (-40°F - 167°F)
    Display Size: 110mm x 62mm (4.3" x 2.4") (H x W)
    Dimensions: 145mm x 210mm x 45mm (5.7" x 8.3" x 1.8") (H x W x L)