The MIC 10 Portable Hardness Tester
Quick and versatile hardness testing using the UCI principle
The MIC 10 Series of portable hardness testers that weigh less than 11 ounces
Operate on 2 standard "AA" batteries
Operation based on the UCI Principle
Test in any direction.
A selection of interchangeable probes are available having loads from .1 to 10.0 kgf to vary the indentation size from one that can not be visually detected to a larger indentation required for testing coarse grain materials.
Advanced Instrument Features:
Scales HRC, HRB, HB, HV, Tensile Strength with MIC-2010 probe only
A single key press toggles between display of average or single values
Easy to read backlighted LCD display
HI/LO alarms
Microdur Probe Models and Styles:
Ten Probe models in four styles and with loads from .1 kgf to 10 kgf are available.
Calibration parameters specific for each probe are stored internally. This allows the
operator to freely interchange probes with the instrument.
| Model | Load | Style | Major Diameter | Total height with connector |
| MIC-2010 | 10 kgf | Standard | .75" | 6.4" |
| MIC-205L | 5 kgf | Extended | .75" | 7.5" |
| MIC-205S | 5 kgf | Shortened | .75" | 3.5" |
| MIC-211 | .8 kgf | Motor | 1.52" | 8.6" |