Low Frequency Spot & Reflection Probes

Spot Bridge (Differential)

Spot bridge/differential probes can be referred to as surface probes but are a lower frequency than their high frequency counterparts can be used to find generic subsurface defects. They are normally fitted with a triax detachable connector but can be fitted with a 2 pin microdot or 4 pin Fischer connector.

Ring Bridge (Differential)

Ring bridge/differential probes have the same characteristics as their spot probe counterparts but are useful for inspections around fasteners. They are also fitted with a triax detachable connector but can be fitted with a 2 pin microdot or 4 pin Fischer connector or other connectors on request.

Spot Reflection (Driver/Pickup)

Spot reflection probes, unlike the bridge/differential type have a broader frequency band, greater depth penetration and less noise. They come standard with a triax detachable connector and can be supplied with a 2 pin microdot, 4 pin Fischer or 4 pin Lemo connectors.

Ring Reflection (Driver/Pickup)

Ring reflection probes have a broader frequency band, greater depth penetration and less noise as well as the ability to operate around large fasteners for deep layer crack detection. They are equipped with a triax detachable connector but can also be supplied with a 2 pin microdot, 4 pin Fischer or 4 pin Lemo on request.